6" Cool Tube 250w MH/HPS Tent Kit

Premium 51CM 6"(150mm flange) Aluminum Cool Tube Reflector

• Oversize aluminum reflector designed excellent for large growing areas
• Dimensions: 51CM(L) x 6in.(flange)
• Glass Length: 40CM

• Steel Frame with White Coating Wing Clamp
• High Reflection Aluminum Reflector

• Detachable durable ceramic socket
• Easy to install if you need to change your reflector
• Ceramic socket should be used with ballast for steady power supply.
• With a 4M power cord

250W MH Tubular Lamp

• Watt:250W
• Color Temp.(K):6400
• Lifetime(H):12000
• The Metal Halide Grow Lamp allows you to stretch your growing season to 365 days a year. Fine-tune your lighting System to provide optimum spectral energy levels that promote vigorous plant growth. It provide high initial and maintained lumen output with optimum spectral energy required for vegetation growth.

250W Magnetic Ballast

1) Main voltage: 220 - 240V
2) Main frequency: 50 - 60Hz
3) Low power consumption
4) Provides long service life and super quiet
5) Low magnetic leakage and low raise temperature
6) Magnetic ballasts for both HPS & MH tubular lamps
7) Color: white
8) Material: steel cover
9) Certificates: CE/ROHS
10) 5 Year warranty

High-pressure sodium (HPS) lamps are smaller and contain additional elements such as mercury, and produce a dark pink glow when first struck, and an intense pinkish orange/red light when warmed.
 

Information:

• Power: 250 watts
• Expected Lifetime(H): 24000
• Initial Luminous Flux(LM): 32000
• Universal positioning
• Cannot plug directly into powerpoint, need ballast to run
• Contains more red spectrum, which is best for flowering
• Strong power to penetrate fog
• High output, high luminescence efficiency
• Fit for all standard HPS grow light systems
• Fit for the Heliophile, such as Rose and Camellia, which grows better at longer sunshine time

6" Aluminum Ducting

1). Application

It's a range of fully flexible uninsulated aluminum/polyester laminated ducting, which has been specially designed for the HVAC market. Because of it's flexibility, it is easy to connect to either round or oval ducting.

2). Construction

It is a mulch-ply reinforced aluminum and polyester laminated ducting with an encapsulated high tensile steel wire helix.

3). Advantages

• Supplied standard 6 meters length, compressed to 0.4-0.6 meter
• Individually boxed
• Easy to connect to either round or oval ducting
• No special tools required for cutting or fixing
• In the event of a fire no toxic gases are emitted
• The products have been successfully tested for fire resistance
• Heavy duty flexible dual layer aluminum foil air duct

Grow Tent

• Size: 0.8m (W) x 0.8m (D) x 1.6m (H)
  or 1m (W) x 1m (D) x 2m (H)
  or 1.2m (W) x 1.2m (D) x 2m (H)
• The exterior is made of commercial grade super heavy duty oxford cloth.
• The inner lining is made of highly non-toxic and water proof 600D 95% reflective mylar fabric.
• This unit is designed with exterior zippers so that you can setup and take down in minutes.
• The frame is very sturdy with metal rods that is connected with high quality pole connectors.
• Non-toxic to Environment
• Up to date highly reflective material will NOT react under light and heat to release any harmful gasses, which might damage sensitive plants.
• Suitable for any setup, supporting up to 1000W Lamps MH and HPS
• 2(3 for 1m tent) Ventilation Windows at the bottom
• Extra portable water-proof tray floor for easy cleanup and better protection
• 2 x 6" adjustable interaction socks (air intake) which can be used with fan
• 2 x 80mm Cable Socks on the back (top and bottom) so that you can run your cables in and out of the tent with ease
• 2 x 6"(1 for 0.8m tent) Cooltube socks for air-cooled reflectors at the top of the sides of the tent
• 1 x 8" (6" for 0.8m tent) adjustable exhaust socks (air-out outlet) sleeves on the roof of the tent which allows you to remove the hot air out of the tent

6" Hydroponics Axial Vent Fan

ideal for air cooled reflector Cooling and Grow Tent Grow Room air circulation
Works best with enclosed grow spaces as an air duct

Features:

1) CE certificat
2) High impact polycarbonate blade
3) Come with AUS standard plug&
4) Perfect for ventilation of Grow Room or air cooling of grow light reflector.
5) Noiseless and power saving .

Reflector YoYo

• Stainless steel spring
• Eyebolts for hanging the reflector
• Screw hooks to connect the hanger to the ceiling
• To adjust the height of reflector with ease
• To provide reliable support & befitting distance from plants with tension mechanism
• Max 13kg weight load capacity per pair
• Compatible with all parabolic and round reflectors, so long as hooks and eyebolts suit
• Overall Dimension : 90 x 65mm
• Maximum Extension Length: 850mm
• Come with screw hooks and eye bolts